Price: CDN$ 30.28
(as of Feb 03,2021 21:15:20 UTC – Details)
For more than ten years, BLACK+DECKER The Complete Guide to Wiring has been the best-selling home wiring manual in North America. Now with more than two million copies in print, this is the home reference book more DIYers choose than any other for many reasons.
As the most current wiring book on the market, you can be confident that your projects will meet national writing codes. You’ll also spend more time on your project and less time scratching your head thanks to more than 800 clear color photos and over 40 diagrams that show you exactly what you need to know about home electrical service; all the most common circuits, all the most-needed techniques, all the most essential tools and materials.
The information in this book has been created and reviewed by professional electricians under the watchful eye of the experts at BLACK+DECKER. You can find plenty of articles and videos about wiring online or in other publications, but only The Complete Guide to Wiring has passed the rigorous test to make it part of The Best DIY Series from the Brand You Trust.
From the Publisher
The Complete Guide to Wiring, Updated 7th Edition
Current with 2017-2020 Electrical Codes
How to Connect Wires to Screw Terminals
Strip about 3⁄4″ of insulation
Strip about 3⁄4″ of insulation from each wire using a combination tool. Choose the stripper opening that matches the gauge of the wire, and then clamp the wire in the tool. Pull the wire firmly to remove plastic insulation.
Form a C-shaped loop
Form a C-shaped loop in the end of each wire using a needlenose pliers or the hole of the correct gauge in a pair of wire strippers. The wire should have no scratches or nicks.
Hook each wire around the screw
Hook each wire around the screw terminal so it forms a clockwise loop. Tighten the screw firmly. Insulation should just touch head of screw. Never place the ends of two wires under a single screw terminal. Instead, use a pigtail wire (see page 31).
How to Connect Circuit Breakers
Shut off the main circuit breaker
Shut off the main circuit breaker in the main circuit breaker panel (if you are working in a subpanel, shut off the feeder breaker in the main panel). Remove the panel cover plate, taking care not to touch the parts inside the panel. Test for power (photo, right).
Open a knockout
Open a knockout in the side of the circuit breaker panel using a screwdriver and hammer. Attach a cable clamp to the knockout.
Hold the cable across the front
Hold the cable across the front of the panel near the knockout, and mark the sheathing about ½” inside the edge of the panel. Strip the cable from the marked line to the end using a cable ripper. (There should be 18″ to 24″ of excess cable.) Insert the cable through the clamp and into the service panel, and then tighten the clamp.